Ameri-lon  a Superior Gasket Material

Ameri-lonA new family of products using a new hybrid material, Ameri-lon is the result of years of experience in producing PTFE materials.  It is designed for a wide range of demanding industrial requirements including gasket and bearing applications.  Ameri-lon is filled PTFE, uniquely combining the properties of PTFE and filler materials.  The filler enhances the physical properties of PTFE and results in a superior gasket material.  Ameri-lon shows less cold flow and greater sealing ability than other filled PTFE materials or Fluorocarbons.  It maintains the chemical attack resistance and the temperature range of PTFE.

Ameri-lon is available in a wide range of products including gaskets, sheet, molded tube and rod as well as finished and machined items

Ameri-lon can be considered as an equivalent to the Garlock Gylon Product range.  The interchange for the Gylon products is as follows:

*Ameri-lon 9504 = Gylon 3504

*Ameri-lon 9510 = Gylon 3510

*Ameri-lon 9500 = Gylon 3500

*Ameri-lon Expanded PTFE = Gylon 3450/3545

*Amerilon PTFE Sheet Gasketing = Gylon Chemrex 3570

Ameri-lon inquiries can be answered by our Inside sales Staff at 714-593-9780  by Fax at 714-593-9701 or by 

E-mail at sales@americansealandpacking.com

* This is to be used as a general guide only.  All applications should be considered individually based on the temperature, pressure, media being sealed, Ph, gasket dimensions, torque load, bolt size and any other factor effecting the gasket.  For assistance in determining the suitability of an application contact our technical staff at American Seal & Packing. No application should be undertaken by anyone without independent study and evaluation for suitability. Never use more than one gasket in one flange joint, and never reuse a gasket. Improper use or gasket selection could cause property damage and/or serious personal injury. Data reported in these pages is a compilation of field testing, field service reports and/or in-house testing. While the utmost care has gone into publishing the information contained herein, we assume no responsibility for errors. Specifications and information contained in these pages are subject to change with notice. This edition cancels and obsoletes all previous editions.

Kevlar is a registered trademark of DuPont.
Teflon ® is a registered trade mark of E.I. Du Pont de Nemours and Company.

 Only DuPont makes TEFLON ®. Ameri-lon is a registered trademark of American Seal & Packing